Home | Press Release | Investor Relations | Search Site  
Home > Products > AudioSaver: System Requirements
Quick Links
Directions to PEC
VoiceSaver NT
Insight IVR
Email Us

 

 

 

 

 

Address

Parwan Electronics Corporation
1230 Highway 34 Aberdeen, NJ 07747
(USA
)
Tel: 732.290.1900
Fax: 732.566.8771

 



Introduction | Product Overview | Brochure | System Requirements

AudioSaver:System Requirements

Requirements

An Intel Pentium III 1.0 GHz processor or Higher
MS-DOS or Windows 2000/XP
256 Megabytes of RAM or Higher
CD-ROM
(2) 40 GB Hard Drives (Note: 10MB = 1 Hour of voice) (2nd Hard Drive for Backup)
VGA card
VGA monitor
Keyboard
Voice Response Board(s) (Specifics depends on application and PSTN Interface)

Specifications

Functional Capacity
Number of Ports 4-128
Hours of Message Storage Capacity Up to 7,000 hours
Number of Mailboxes Up to 10,000
Normal Operating Environment
Temperature 40 to 100 degrees F
Maximum Rate of Temperature Change 15 degrees F per hour
Humidity 20 to 80% non condensing
Altitude -1000 to 10,000 ft. ASL
External Power Supply Module 100-120 V 0.39 A 50-60Hz
Heat Dissipation 5,500 BTU per hour
Floor Loading 215.9 lbs/sq. ft.
Short-Term Environment
Temperature 35 to 120 degrees F
Humidity 20 to 80% non condensing
Altitude -1000 to 10,000 ft. ASL
Storage Environment
Temperature -40 to 140 degress F
Humidity 10 to 95% non condensing
Altitude -1000 to 40,000 ft ASL
Regulatory Approvals
Safety UL 1459, Second Edition/CSA / C222, No. 220
EMC FCC Part 15, Class A
Telecom FCC Part 68/DOC, CS-03
Data Communications RS232, X25, Ethernet, TCP/IP
Signaling SMDI/SMSI, In-band (MF & DTMF) / R1, R2, SS7
Network Interfaces Ground Start Trunk, E & M Trunk, DID Trunk, T1 (D-1) / ES1

 

Copyright© 2003 Parwan Electronics Corporation. All Rights Reserved. Site Maintained by Parwan Electronics Corpn.